Skip to main content

IP-A1PC580R

  • IP-A1PC580R_pf1e.jpg
IP-A1PC580R_pf1e.jpg
IP-A1PC580R_pr1e.jpg

IP Ceiling Mount Speaker 8W

IP-A1PC580R

The IP-A1PC580R is a PoE-powered Ceiling Speaker with a built-in 8 W amplifier and internal data storage for up to 20 audio files. It supports SIP protocol for flexible integrations with VoIP devices, and its 20 multicast ports are available for group paging operations. It can also receive broadcasts from Video Management System using ONVIF. Device control and further system integration is accessed through remote API (HTTP) or local control inputs.

  • 20cm (8”) dual cone-type speaker with metal construction
  • Receive SIP audio, ONVIF Audio and Multicast
  • Local broadcast using internal audio files or local audio source
  • 1 audio input (LINE/MIC selectable, phantom power On/Off)
  • 8W built-in amplifier, 1 LINE audio output
  • 2 control inputs and 1 control output
  • HTTP commands (receive)
  • Audio file storage (20 files, total 80MB, WAV/MP3)
  • Playback programs (Repeat, Weekly Timer)
  • PoE powered
QTY
▼
Power Source
PoE (IEEE802.3af Class 3)
Power Consumption
12.95 W (rated output)
5 W (IEC62368-1)
Amplifier Rated Output
8 W
Sensitivity
97 dB (1 W,1 m)
Maximum Sound Pressure Level
106 dB (8 W,1 m)
Frequency Response
50 Hz - 16.5 kHz
Speaker Component
20 cm (8”) Dual cone-type
Audio Codec
Opus, PCMU (G.711u), PCMA (G.711a), G.722
Broadcasting Mode
SIP Broadcasting/SIP calling Mode: Opus/PCMU/PCMA/G.722, P2P/SIP Server Connection
Multicast Broadcasting Mode: Opus/PCMU/PCMA/G.722 Auto codec recognition, 20 ports
VMS Broadcasting Mode: PCMU
Internal Message Broadcasting Mode
Local Broadcasting Mode: Output from LINE/MIC IN to SPEAKER OUT
Note: Each broadcast mode can be assigned an order of priority using the Priority Setting function.
Sound Source Files
Max. 20 files (File storage capacity: 80 MB total)
Supported file formats
WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo
MP3 file: 32/44.1/48 kHz sampling frequency, 64 - 320 kbps, CBR/VBR, monaural/stereo
Repeat playback: Playcount (1 - 10 times), Duration (5 - 3600 sec) or Timer (from Start time to End time)
Interval time: 0 - 60 sec, Delay time: 0 - 30 sec
Trigger: Control Input or Remote API (HTTP)
Network I/F
100BASE-TX, Auto MDI/MDI-X, RJ45 connector
Network Protocol
TCP/IP, UDP, HTTP, RTP, RTSP, RTCP, ARP, ICMP, IGMPv3, NTP, SIP (RFC3261)
Audio Input
1 channel, electronically-balanced,10 kΩ LINE/MIC selectable (Rated input: LINE: 0 dB (*1), MIC: -60 dB(*1)
PAD function(-20 dB(*1), Phantom power ON/OFF(12 V DC), volume adjustable
removable terminal block(6 pins)
Audio Output
1 channel, electronically-balanced, 600 Ω or less
Rated output: 0 dB(*1), removable terminal block (6 pins)
Control Input
2 channels, no-voltage make contact inputs, open voltage: 5 V DC, short-circuit current: 2 mA or less, removable terminal block (6 pins)
Control Output
1 channel, open collector output, withstand voltage: 30 V DC, control current: 150 mA or less, removable terminal block (6 pins)
Indicator
STATUS (green/blue/yellow/red), LINE/MIC IN (green/red), OUTPUT(green), LINK/ACT(green)
Clock Accuracy
±13 seconds per month
Time Adjustment
Manual time setting, Time adjustment by NTP server
Power Outage Protection Period
24 hours (RTC time retention, at 40 °C (104 °F)
Dimensions for Fixing Hole
Mounting hole: Ø228.6 mm (9")
Speaker Mounting Method
Screw in type
Finish
Frame: Steel plate, white (RAL 9016 equivalent), paint
Grill: Steel net, white (RAL 9016 equivalent), paint
Dimensions
Ø324 x 111 (D) mm (12.76" x 4.37")
Weight
1.8 kg (3.97 lb.)
Included Accessories
Pattern paper x 1, Removable terminal plug (6 pins, preinstalled on the unit) x 2, Mounting screw (5x38) x 4
Optional Accessories
Back Can (for UL 2043 certified installation): HY-BC580U
(*1) 0 dB = 1V
NOTE: Please do not install the product near heat insulation material, or cover the product with heat insulation or acoustic absorbing materials to prevent fire risk. Please do not install the product in damp or wet locations or areas with high humidity (condensing) as it may cause damage to the product.
*ONVIF is a registered trademark of ONVIF Inc.
*These specifications apply to the firmware version 3.1.0 or later. For the latest specifications and firmware, please refer to the TOA DATA Library (https://www.toa-products.com/international/)

Please download Datasheet to access full specifications.

The IP ceiling mount loudspeaker shall be of an in-ceiling type design, with a full robust metal construction that shall include a class D type amplifier capable of producing up to 8 watts of power. The IP ceiling mount loudspeaker shall be SIP compatible to broadcast clear and intelligible VoIP messages via a single Category 5 or greater network cable and shall support various standard network protocols and forums such as ONVIF (Open Network Video Interface Forum) and shall be able to complement VMS (Video Management System) and other audio network integration systems. Twenty multi-cast ports shall be available for group paging. The IP ceiling mount loudspeaker shall have a LINE/MIC input to accommodate an external microphone allowing the possibility to achieve two-way communication (talk-back) or other external audio devices. Switching between LINE/MIC shall be accomplished by using DIP switches. Phantom power shall be available for the microphone as well as an independent volume adjustment. The IP ceiling mount loudspeaker shall have the facility of storing up to twenty audio files with the code of WAV or MP3 format internally. The device shall have the flexibility of broadcasting these files at predetermined times by setting the start and end time along with the day(s) of the week or repeated when necessary and triggered from a control input, or remote API (HTTP). There shall be two controlled inputs and one controlled output. The IP ceiling mount loudspeaker shall be capable of being muted by TOA IP-A1PG Paging Gateway as the highest priority operation. Remote settings of the IP ceiling mount loudspeaker shall be achieved by connection to a Windows® based personal computer and by using the PC’s browser, operational settings, functions and system status can be established. The loudspeaker shall incorporate a single 20 cm (8”) full-range dual cone-type transducer with a smooth frequency response of 50 Hz to 16.5 kHz measured on axis with a Sound Pressure Level (SPL) of 97dB measured at 1 metre with a power input of 1 watt or 106dB with a power input of 8 watts measured at 1 metre. The power source shall be supplied from a PoE switching hub. The dimensions shall be φ324 × 111 mm (d) (12.76" x 4.37") weighing 1.8 kg (3.97 lbs). The finish of the loudspeaker shall be: Baffle: steel plate, white (RAL 9016 equivalent). Grille: Steel net, white (RAL 9016 equivalent). Optional extras; Back can HY-BC580U manufactured by TOA Corporation Manufacturer: TOA Corporation Model: IP-A1PC580R

  • IP-A1PC580R_pf1e.jpg
  • IP-A1PC580R_pr1e.jpg
IP-A1PC580R_pf1e.jpg

Need other technical materials like software, firmware, or EASE files? Please visit our Download Center.
*Sign-in or membership registration is required.

Get Your Quote.