T-001T
Dual Line Output Expansion Module with DSP
T-001T
The T-001T is a plug-in module designed for use with the 9000 Series mixer / amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ohm up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently.
- 2 balanced line outputs
- Digital signal processing: 10-band parametric EQ, Bass/Treble, Loudness, High and Low Pass Filters, Compressor, TOA speaker EQ presets
- Removable terminal block
- Up to 3 output modules per chassis
* 0 dB = 1 V
Power Supply
+24 V DC, -24 V DC, +6 V DC
Current Consumption
35 mA (at +24 V DC), 35 mA (at -24 V DC), 60 mA (at +6 V DC)
Output
2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins)
removable terminal block (3 pins)
D/A Converter
24 bit DAC
Sampling Frequency
48 kHz
Frequency Response
20 Hz - 20 kHz, +1, -3 dB
Total Harmonic Distortion
0.005 % (at 1 kHz, 20 Hz - 20 kHz BPF, 5 V output, 10 kΩ load)
Signal to Noise Ratio
Over 73 dB (at 20 Hz - 20 kHz BPF)
Residual Noise
Under -91 dB (at 20 Hz - 20 kHz BPF, VOL: -70 dB)
Crosstalk
Over 87 dB (at 20 kHz)
Tone Control
Bass: ±12 dB (at 100 Hz)
Treble: ±12 dB (at 10 kHz)
Treble: ±12 dB (at 10 kHz)
Parametric Equalizer
10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB,
Q: 0.3 - 5
Q: 0.3 - 5
Speaker Equalizer
10 (setup software has 30 TOA speaker presets)
High-Pass Filter
-12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
Low-pass Filter
-12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points
Compressor
Depth: 1 - 5
Delay
0 - 40 ms (1 ms step), maximum 40 ms (CH 1 + CH 2), mixer mode only
Operating Temperature
-10 ℃ to +40 ℃
Finish
Panel: Aluminum, hair-line
Dimensions
35 (W) x 78 (H) x 91.5 (D) mm
Weight
82 g
Included Accessories
Removable terminal plug (3 pins) …2, Module mounting screw …2
Please download Datasheet to access full specifications.
Optional Accessory
2-channel output module for full digital mixer M-9000M2. High fidelity 24-bit ad-converter and extremely low distortion. Built-in digital signal processing (DSP) with height and deep tone control, high and low pass filters, 10 parametric equalizer, delay and 15 pre-set correction filter of various speakers. Compressor with 5 predefined settings for ease of use. Connection via two supplied Plug-in 3-pin connectors.
Need other technical materials like software, firmware, or EASE files? Please visit our Download Center.
*Sign-in or membership registration is required.
Get Your Quote.
- Products
T-001T
