YM-1J
Mic Connector
YM-1J
- Flush-mounted wall plates for MIC Connection
- 1/4" female TRS jack, single gang wall plate with cover
Jack
Double pole jack
Cable Requirements
Microphone vinyl cable with sectional area of 0.75 - 2.0 mm²
Recommended Plate
YP-1AF
Compatible Connector
Single or double pole plug
Finish
Cover : ABS resin (off white)
Frame : Steel plate (t=1.2)
Frame : Steel plate (t=1.2)
Dimensions
45 (W) x 110 (H) x 48.1 (D) mm (1.77" x 4.33" x 1.89")
Weight
750 g (1.65 lb)
Included Accessories
Screw M4x35 x 2
*When routing a power or speaker line and a microphone line through the same electric box, provide a barrier between the two for insulation
*For cables with sectional area of under 0.75 mm², fold back their cores to increase the sectional area before making a connection.
*H(hot), C(cold), and E(ground) are shorted. Therefore, mixers or amplifiers using phantom power cannot be used.
*For cables with sectional area of under 0.75 mm², fold back their cores to increase the sectional area before making a connection.
*H(hot), C(cold), and E(ground) are shorted. Therefore, mixers or amplifiers using phantom power cannot be used.
Please download Datasheet to access full specifications.
Need other technical materials like software, firmware, or EASE files? Please visit our Download Center.
*Sign-in or membership registration is required.
Get Your Quote.
- Products
YM-1J
