MB-25B
Rack mount bracket
P-906MK2
Power Amplifier
P-906MK2
The P-906MK2 Power Amplifier delivers up to 60 watts of output power. The power amplifier has an input port to accept one plug-in module.
Type
Power amplifier
Power Source
AC mains, 120 V, 60 Hz
Power Consumption
100 W
Output Power
60 W RMS
Power Bandwidth
(D) 20 to 20,000 Hz, 0.5% THD
(T) 50 to 20,000 Hz, 0.5% THD
(T) 50 to 20,000 Hz, 0.5% THD
Frequency Response
(D) 20 to 20,000 Hz, ±1 dB
(T) 20 to 15,000 Hz, ±1 dB, (T) 20 to 20,000 Hz, +1 dB, -3 dB
(T) 20 to 15,000 Hz, ±1 dB, (T) 20 to 20,000 Hz, +1 dB, -3 dB
Total Harmonic Distortion
0.01% at 1 kHz, rated output
Input
One Input Port : Port accepts any input module expect T-01.
One Direct Input
※ Use of direct input prohibits use of modular input port.
One Direct Input
※ Use of direct input prohibits use of modular input port.
Input Sensitivity/Impedance
Input Port : 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input : 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input : 100 mV or 1000 mV (switchable)/10 kΩ
Outputs (T)=Transformer, (D)=Direct
Main (T) : 8 Ω, 25 and 70 volts, balanced
Main (D) : 4 Ω, unbalanced
Main (D) : 4 Ω, unbalanced
Output Regulation (1kHz)
(D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load
(T) Less than 1.0 dB, no load to full load
Signal to Noise Ratio
Input level switch in 0 dBV (1000 mV) position : 108 dB
Input level switch in -20 dBV (100 mV) position : 90 dB
Input level switch in -20 dBV (100 mV) position : 90 dB
Control
1 Input gain control 1 Input level switch
1 Power ON/OFF switch 1 Low-Cut switch
1 Power ON/OFF switch 1 Low-Cut switch
Indicator
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Protection
Self-protection, with AC fuse (inside)
Connector
Input : Card-edge connector and screw-terminal strip
Output : Screw-terminal strip
AC outlet : 3-pin grounding type
AC power cord/plug : SJT, 3-prong type
Output : Screw-terminal strip
AC outlet : 3-pin grounding type
AC power cord/plug : SJT, 3-prong type
Operating Temperature
-10 °C to +60°C (12 °F to 140 °F)
Finish
Black
Dimensions
420(16.54") x 99.1(3.90") x 358(14.09") mm
Weight
9.1 kg (20.06 lb.)
Included Accessories
Volume control cover (YA-920)……1
Optional Accessories
Rack mounting bracket (MB-25B)
Please download Datasheet to access full specifications.
Installation Accessories
Functional & Interface Accessories
BT-01
Bluetooth® Module
B-01F
Balanced Line Input
B-01S
Line Input Module
B-11S
Line Input Module
B-21S
Bridging Transform Module
B-41S
Bridging Transform Module
E-03R
Controller Module
L-01F
Balanced Line Matching Input
L-01S
Line Input Module
L-11S
Line Input Module
L-41S
Line Input Module
M-01F
Mic Preamplifier Module
M-01M
Mic Preamplifier Module
M-01P
Mic Preamplifier Module
M-01S
Microphone Input Module
M-11S
Mic Preamplifier Module
M-21S
Mic Preamplifier Module
M-41S
Microphone Module
M-61S
Microphone Input Module
ML-11T
900 Series Plug-in Module
NM-01-AM
Noise Masking Module
S-01S
Sine Wave Test Tone Generator Module
S-02S
Buzzer/Yelp Tone Generator Module
S-04S
Switch-Selectable Tone Generator Module
SP-11N
SIP Module
T-01S
Line Output Module
T-02S
Line In/Out Preamp Module
T-12S
Line Input with MOH Output Module
U-01F
Unbalanced Line Input
U-01P
Unbalanced Line Input
U-01R
Unbalanced Line Input
U-01S
Line Input Module
U-03R
AUX Module
U-03S
AUX Module
U-11R
Unbalanced Line Input with Mute-Receive
U-11S
Line Input Module
U-12S
Line Input Module
U-13R
AUX Module
U-13S
AUX Module
U-14R
Input Priority Module
U-21S
Unbalanced Line Input with Remote Volume Control
U-43R
AUX Module
U-43S
AUX Module
U-61S
Line Input Module
V-01S
VCA Module
Please sign in to access further technical materials such as software, firmware or EASE files.
Get Your Quote.
