VX-3000PM

Preamp Matrix Panel

VX-3000PM

The VX-3000PM is a preamplifier matrix panel designed for exclusive use with the VX-3000 Series. The number of audio inputs, control inputs, and control outputs can be increased by connecting the VX-3000PM to the VX-3000 Frame via network. It is equipped with 8 audio inputs and their corresponding volume controls, 20 control inputs, and 10 control outputs. A single VX-3000PM unit can be connected to a single VX-3000 Frame, and a maximum of 40 units can be configured per system. Unicast audio transmission can be made among the VX-3000PM units, enabling broadcast activation and microphone announcement at multiple places.

*Note: System operational training is mandatory for your installation team.

Spécification Téléchargements

Source d’alimentation

20 – 33 V DC, removable terminal block (2 pins)

Current Consumption

0.33 A at 33 V DC input, 0.35 A at 24 V DC input

LAN A, B

Number of Connectors: 2 (LAN A, LAN B) Network I/F: 100BASE-TX Network Protocol: TCP, UDP, ARP, ICMP, RTP, IGMP, HTTP Spanning Tree Protocol: RSTP Audio Transmission System: TOA Packet Audio (*1) Audio Encoding Method: PCM Audio Sampling Frequency: 48 kHz Audio Quantifying Bit Number: 16 bits Connection Device: VX-3004F, VX-3008F, VX-3016F, NX-300, VX-3000CT, VX-3000PM, Switching HUB Connector: RJ45 connector Connection Cable: Category 5 twisted pair cable (CAT5) or greater Maximum Cable distance: 100 m

Audio Input

8 inputs Input Level: Input 1 - 4: -60 dBV / -40 dBV / -20 dBV /0 dBV selectable, input impedance 600 Ω, transformerbalanced Input 5, 6: -20 dBV, input impedance 10 kΩ, unbalanced Input 7, 8: 0 dBV, input impedance 10 kΩ, unbalanced Frequency Response: -60 dBV): 200 Hz - 10 kHz, -2 dB ±3 dB -40 dBV / -20 dBV / 0dBV: 100 Hz - 15 kHz, -2 dB ±3 dB Distortion: 1% or less Signal to Noise Ratio: 60 dB or more Removable terminal block (6 pins x 2, 4 pins x 2) Only Input 1 is used in common with the front-mounted ø6.3 mm phone jack

Control Input

20 channels, no-voltage make contact input, open voltage: 30 V DC, short-circuit current: 2 -10 mA Connector: Removable terminal block (10 pins x 2, 12 pins x 2)

Control Output

Channels 1 - 5, relay (a contact), withstand voltage: 30 V DC, control current: 1 A Channels 6 - 10, open collector output (polarized), withstand voltage: 30 V DC control current 100 mA Connector: Removable terminal block (10 pins) x 2

Indicators

Signal Indicator (Green) x 8, Run (Green) x 1, LINK/ACT (Green) x 2

Volume Control

8 channels

Operation

Input level setting switch x 1, IP address setting switch x 1

Dimensions

482 x 44 x 292.4 mm

Weight

3.2 kg

Veuillez télécharger la fiche technique pour accéder aux spécifications complètes.

Please sign in to access further technical materials such as software, firmware or EASE files.