WP-700-AM
Remote Control Panel
MM-700F-AM
Mixer Pre Amplifier
MM-700F-AM
The MM-700F matrix pre amplifier performs matrix controls from 4 LINE plus 2 MIC/LINE level inputs to 4 output channels. Each output channel features 64 DSP preset selections for general equalizations, crossover for sub-woofer, or variety of TOA speakers' EQ settings. 2 MIC/LINE inputs have 1st and 2nd priority levels which can override at assigned output channels automatically or manually. If connected with optional WP-700-AM wall remotes via CAT-5 cable, audio source selection and volume controls can be done remotely. Those all assignments and setups can be done by dip switches on its rear panel without a PC.
This unit fits a wide range of applications that require multi-zone paging and/or background music distribution at restaurants, pubs, retail stores, factories, etc.
- 4 stereo-summing line inputs with matrix routing to 4 amplifier outputs.
- Each line input has input level adjustment and assign restriction setting for each output to prevent routing selection.
- 2 priority MIC/LINE inputs with different priority level for paging or other pre-recorded source which can override the selected line input on assigned output channels.
- Each priority input also has input level, mute sensitivity and mute hold time adjustments.
- Selectable DSP preset selections include general EQ s, like Loudness curves,TOA speaker EQ s and crossover settings to be used with subwoofers.
- Each output channel also has auxiliary line output to deliver audio to other systems.
- This matrix doesn’t need any PC programming or network connection for setup at site. (Maintenance purpose only)
- Optional wall mount remote control, WP-700 can be connected via CAT-5 straight LAN cable to control the line input selection and output volume of each output.
*0 dB = 1 V
Source d’alimentation
100 - 240 V AC, 50/60 Hz
Rated Output
9 W (Idle), 1 W or less (Standby)
Frequency Response
20Hz-20 kHz (-3dB/+1dB)
Total Harmonic Distortion
0.5% or less, at 1kHz, rated output
Input
PRIORITY 1,2: Mic -60dB*/Line -10dB* selectable, 2.2kΩ,
electrically balanced, removable terminal block
LINE IN 1,2,3,4: -10dB*, 10kΩ, unbalanced, 2 RCA jacks (Stereo summing)
LINE IN 1,2,3,4: -10dB*, 10kΩ, unbalanced, 2 RCA jacks (Stereo summing)
Output
LINE OUT 1,2,3,4: 0dB*, 600Ω, unbalanced, removable terminal block
MOH: 0dB*, 600Ω, transformer balanced, removable terminal block
MOH: 0dB*, 600Ω, transformer balanced, removable terminal block
Signal to Noise Ratio
Mic: 60 dB* or more, Line: 75dB* or more (A-weighted)
DSP Preset
16 presets in 4 banks at each output channl, selectable
Muting
Manual mute / Automatic mute
Mute Hold Time
50ms to 10 seconds, adjustable
Control
POWER: ON/OFF switch, Power remote terminal
PRIORITY 1,2: MIC/LINE selector switch, Gain control, Assign switch, Auto mute switch, Mute sense control, Manual mute terminal, Mute hold time control, Priority mix switch
LINE IN 1,2,3,4: Gain control, Assign restriction switch
OUTPUT 1,2,3,4: LINE IN 1-4 selector switch, Output gain control, DSP bank selector switch, DSP preset selector switch
REMOTE 1,2,3,4: Remote control connector (RJ-45), Remote link switch
PRIORITY 1,2: MIC/LINE selector switch, Gain control, Assign switch, Auto mute switch, Mute sense control, Manual mute terminal, Mute hold time control, Priority mix switch
LINE IN 1,2,3,4: Gain control, Assign restriction switch
OUTPUT 1,2,3,4: LINE IN 1-4 selector switch, Output gain control, DSP bank selector switch, DSP preset selector switch
REMOTE 1,2,3,4: Remote control connector (RJ-45), Remote link switch
Indicator
POWER: 1 Power LED
PRIORITY 1,2: 1 Signal LED, 1 Peak LED
LINE IN 1,2,3,4: 1 Signal LED, 1 Peak LED
OUTPUT 1,2,3,4: 2 Activated PRIORITY LED, 1 Connected REMOTE LED, 4 Selected LINE LED, 1 Signal LED, 1 Peak LED
PRIORITY 1,2: 1 Signal LED, 1 Peak LED
LINE IN 1,2,3,4: 1 Signal LED, 1 Peak LED
OUTPUT 1,2,3,4: 2 Activated PRIORITY LED, 1 Connected REMOTE LED, 4 Selected LINE LED, 1 Signal LED, 1 Peak LED
Priority
PRIORITY 1 > PRIORITY 2 > LINE 1,2,3,4
Compliance/Certifications
cULus 60065, EN60065, EN55032, EN55020, FCC part15 class A
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
35% to 80%RH (no condensation)
Finish
Panel:Aluminum, hair line, black
Case:Steel plate, black, paint
Case:Steel plate, black, paint
Dimensions
420(W) X 107.6(H) X 350(D) mm (16.54" X 4.24" X 13.78")
Weight
5.7kg (12.3 lbs.)
Included Accessories
Power code (2m, 5.65ft.) x 1, Removable terminal plug (5pins x 2, 3pins x 1, 2pins x 4), Rack mounting bracket x 2, Bracket mounting screw x 4, User's manual x 1
Optional Accessories
Remote controller: WP-700-AM
Veuillez télécharger la fiche technique pour accéder aux spécifications complètes.
Accessoires fonctionnels et d’interface
Please sign in to access further technical materials such as software, firmware or EASE files.
Get Your Quote.
