N-SP80VS1

N-SP80VS1 SIP Video Door Station

N-SP80VS1

The N-SP80 Series SIP Video Intercom System offers flexible audio and video communications using standard SIP and Onvif protocols. It can integrate with external SIP compatible systems through a SIP server. Peer-to-Peer mode is also available for easy system configuration without  a SIP server. TOA’s N-8000SG SIP gateway software is fully compatible with TOA’s N-8000 IP intercom system.

The N-SP80VS1 SIP Video Door Station is designed to provide clear and intelligible communication to a Multimedia Station over an Ethernet network. It is equipped with an assignable call switch, a night-view camera and two control relay outputs.

Product Features:

  • Compatible with major audio codecs
  • Now Cisco Certified
  • Built-in AEC (Acoustic Echo Canceller) enables full-duplex communication
  • Photo Sensitive Sensor detects brightness
  • IR LEDs help to capture video even in dark environments
  • Resolution up to 1080p
  • Two control relay outputs
  • IP54 grade water/dust proof construction
  • Mounts in 4-gang electrical box (The YC-400 backbox is available from TOA)

    (Quick Installation Guide)

Specifications:

Phone Features Web support multi-language
Auto-answer
Volume control
Direct IP call without SIP proxy
Auto-Provision
Network Features 2x10/100Mbps Ethernet Port
Security: Password Protection, IP address filtering, SIP over TLS,
HTTPS encryption, user access log
Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP,
RTP, TCP, UDP, ICMP, DHCP, ARP
SIP Features SIP v1(RFC2543), SIP v2(RFC3261)
Audio codecs: G.711a, G.711μ, G.722, G.729
Video codecs: H.264 MPEG-4/MJEG (E21V only)
Speech Quality: 7kHz Audio
Echo Cancellation
Voice Activation Detection
Comfort Noise Generator
Switches 1 Call button, 1 reset button (on board)
Camera 3M pixels
Resolution up to 1080p
Microphone 1 integrated microphone, IP67
Speaker 1W, IP66
Control Input 2 input relays for alarm/ (Voltage, Current)
Control Output 2 output relays for door opener/ (Voltage, Current)
Indication Status lamp (colors: red, green, blue)
Power Source 12V DC
Power Consumption less than 12W
IP Grade IP65
Installation Flush-mounted, Fit in Clipsal 164/4 back box
Operating Temperature -20 ° ~ 55 °C (-4 °F - 131° F)
Finish Plate: Stainless steel
Dimension 210 (H) x 120 (W )x 45.6 (D)mm (8.27" x 4.72" x 1.8")