D-2000CB

CobraNet® Interface Module

D-2000CB

The D-2000CB Cobranet Interface Module is designed for use with the D-2008SP Digital Mixing Processor Unit. When mounted to the D-2008SP, it allows audio transmission between this D-2008SP and other one. Each function is set by the dedicated setting software on a PC.

Allows audio transmission among D-2008SPs

*CobraNet was developed by Cirrus Logic, a US company and is a network protocol utilizing Ethernet networks to perform high-quality multi-channel digital transmission. It allows using existing Ethernet equipment such as CAT-5 switching hubs.

Specifications A&E Specs Downloads

Input

16 channels, 20 bit/24 bit

Output

16 channels, 20 bit/24 bit

Sampling Frequency

48 kHz

Network I/F

CobraNet: 100BASE-TX, PRIMARY/SECONDARY 2 system,
RJ45 connector, Enables decentralized installation, Audio transmission only
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable
To be connected via the specified switching hub
Note: This network should be completely independent of other LAN.
Number of D-2008SP connection: Max. 4
Switching hub stage: Max. 7
Max extend distance: 100m (328.1 ft) (connected via a switching hub)

Finish

Panel: Pre-coated steel plate

Dimensions

25.5 (W) x 82.5 (H) x 144 (D) mm (1" x 3.25" x 5.67") (excluding projection)

Weight

100 g (0.22 lb)

Included Accessories

Screw …1

* Cobranet is a registrered trademark of Cirrus Logic Corporation.

Please download Datasheet to access full specifications.

Digital CobraNet interface module with redundant network connections (primary and secondary). Stereo outputs in the AES / EBU format with 2 RJ-45 jacks.

Need other technical materials like software, firmware, or EASE files? Please visit our Download Center.
*Sign-in or membership registration is required.

Download Center

Get Your Quote.

Products
D-2000CB