BG-235
Mixer Amplifier
BG-235
The BG-235 is a 35 W three-input mixer amplifier for background music and general announcement. It is suited for use in bars, retail stores, and banquet rooms, and is equipped with the MOH OUT that permits 2-channel broadcast when used in conjunction with the optional booster amplifier BA-235 (35 W) or BA-260 (60 W).
- All inputs/ outputs have removable terminal blocks for quick and easy installation.
- Rear panel-mounted DIP switches allow easy settings.
- 3 line inputs, 1 is mic/line switchable, while 2 and 3 are equipped with RCA pin jacks.
- Recessed tamper-proof bass and treble controls preserve system settings.
- Provides auto/manual mute function with adjustable muting sensitivity.
- 2-channel broadcast system capability together with zone 2 expansion capability in conjunction with BA-200 Series.
- Any of the 3 inputs assignable to MOH/ZONE 2 out
* 0 dB = 1 V
Power Source
120 V AC, 60 Hz
Rated Output
35 W
Power Consumption
90 W (rated output), 55 W (based on cULus standards)
Frequency Response
50 Hz - 20 kHz
Total Harmonic Distortion
0.5 % or less, at 1 kHz, rated output
Signal to Noise Ratio
Mic/Line 1: 60 dB or more, Line 2, 3: 80 dB or more
(Band Pass: 20 Hz - 20 kHz, Tone Controls: Centered)
(Band Pass: 20 Hz - 20 kHz, Tone Controls: Centered)
Input
Mic: -60 dB*/ Line 1: -10 dB*
Mic/Line 1 selectable, 600 Ω, electronically balanced, removable terminal block
Line 2, 3: -10 dB*, 10 kΩ, unbalanced, removable terminal block or RCA jack
Mic/Line 1 selectable, 600 Ω, electronically balanced, removable terminal block
Line 2, 3: -10 dB*, 10 kΩ, unbalanced, removable terminal block or RCA jack
Output
Speaker: 4 Ω, 25 V (18 Ω) and 70 V (140 Ω),
balanced, removable terminal block
MOH: 0 dB*, 600 Ω, balanced, removable terminal block
Line: 0 dB*, 600 Ω, unbalanced, removable terminal block
balanced, removable terminal block
MOH: 0 dB*, 600 Ω, balanced, removable terminal block
Line: 0 dB*, 600 Ω, unbalanced, removable terminal block
Output Regulation
2 dB or less, no load to full load (1 kHz)
Tone Control
Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Muting
Manual mute/Automatic mute
Control
Mic/Line 1 gain control, Line 2 gain control, Line 3 gain control,
Bass tone control, Treble tone control, MOH out gain control,
Mute control (Manual mute), Mute sense control, Auto mute switch (Mic/Line 1)
Mic/Line 1 selector switch, Mute receive switch (Line 2, 3),
MOH assign switch (Mic/Line 1, Line 2, 3), Power ON/OFF switch
Bass tone control, Treble tone control, MOH out gain control,
Mute control (Manual mute), Mute sense control, Auto mute switch (Mic/Line 1)
Mic/Line 1 selector switch, Mute receive switch (Line 2, 3),
MOH assign switch (Mic/Line 1, Line 2, 3), Power ON/OFF switch
Indicator
Power LED, Signal LED, Peak LED
Operating Temperature
0 ℃ to +35 ℃ (32 ℉ to 95 ℉)
Operating Humidity
35 % to 80 %RH (no condensation)
Finish
Panel: ABS resin, black
Case: Steel plate, black, paint
Case: Steel plate, black, paint
Dimensions
210 (W) x 94.3 (H) x 265 (D) mm (8.27 x 3.71" x 10.43")
Weight
4 kg (8.82 lb)
Included Accessories
Volume control cover: YA-920…3
Removable terminal plug (2 pins)…3, Removable terminal plug (3 pins)…1
Removable terminal plug (4 pins)…1, Removable terminal plug (5 pins)…1
Removable terminal plug (2 pins)…3, Removable terminal plug (3 pins)…1
Removable terminal plug (4 pins)…1, Removable terminal plug (5 pins)…1
Optional Accessories
Rack mounting bracket: MB-25B-BK, MB-25B-J
Please download Datasheet to access full specifications.
Optional Accessory
The mixer amplifier shall control and mix up to three input signals and deliver an audio output of 20W/35W. Frequency response shall be 50 to 20k Hz with 0.5% or less THD at rated output. The output regulation shall be less than 2dB, no load to full load. The mixer amplifier shall have switch-selectable MIC/LINE input, electronically balanced, with removable terminal block connections and two LINE inputs, unbalanced, with removable terminal block connections and RCA jacks. The MIC/LINE 1 input impedance shall be 600 ohms and the LINE 2/3 input impedance shall be 10k ohms. The mixer amplifier shall include a MOH/ZONE 2 output with removable terminal block. The mixer amplifier shall include 25V, 70V and 4 ohm balanced outputs. Built-in protection circuitry shall monitor current level to minimize potential damage from overloads, and disable output during excessive operating temperature over 221°F (105°C). The mixer amplifier shall incorporate a mute function to allow MIC/LINE input to override LINE 2 and 3 input without interrupting the MOH/ZONE 2 output. A rear-mounted MUTE SENSE control shall allow threshold adjustment of mute activation. Terminals for activating the mute function manually with external switch closure shall also be included. Rear-mounted DIP switches shall allow assignment of LINE 2 and/or LINE 3 to respond to the mute function activation. Each input shall be assignable to the MOH/ZONE 2 output. 2-channel broadcast shall be possible using the MOH/ZONE 2 output. Recessed Bass and Treble controls shall be located on the front panel. Accessory volume control security knob shall be included to prevent the accidental change of input volume settings.
The mixer amplifier shall be cULus-Listed and capable of operation from a 120V AC / 60Hz line breaker. Dimensions (W x H x D) shall be 8.27" x 3.71" x 10.43" (210 x 94.3 x 265 mm). Net weight shall be BG-220: 7.72 lbs. (3.5kg); BG-235: 8.82 lbs. (4kg). Front panel finish and material shall be black ABS resin and case finish (and material) shall be black steel plate.
The mixer amplifier shall be TOA model BG-220 / BG-235.
The optional rack-mount bracket shall be TOA model MB-25B-BK.
The optional rack-mount bracket (two units) shall be TOA model MB-25B-J.
Need other technical materials like software, firmware, or EASE files? Please visit our Download Center.
*Sign-in or membership registration is required.
Get Your Quote.
- Products
BG-235
