System Components
Array microphone x 1, Control unit x 1
Power Source
24 V DC (supplied from the Control unit)
Microphone
Unidirectional electret condenser microphone
Directivity Angle
Horizontal: 50° (800 Hz - 18 kHz, Array mode), 180° (Cardioid mode), Vertical: 90°
Frequency Response
150 Hz - 18 kHz
Maximum Sound Pressure Level
100 dB SPL
Indicator
Microphone status indicator (output: green, mute: red)
Microphone Cable
Shielded twisted pair cable 10 m (32.81 ft) with connector equivalent to TA-3
Maximum Cable Length
70 m (229.66 ft) (use of the AES/EBU cable)
Finish
Body, Punched net: Surface-treated steel plate, black, 30% gloss
Side cover: ABS resin, black
Dimensions
483.9 (W) x 22.1 (H) x 64.9 (D) mm (19.05" x 0.87" x 2.56") (excluding Cable)
Power Source
24 V DC (supplied from the AC adapter (option)
Usable DC power supply plug: 5.5 mm (0.22") outer diameter, 2.1 mm (0.08") inner diameter, 9.5 mm (0.37") long, and non-polarity type.
Current Consumption
410 mA or less
Signal to Noise Ratio
90 dB or more
Input
Combined type of TA-3 (dedicated to the array microphone)
Output
Combined type of XLR-3-32, Removable terminal block (3 pins)
Network
Network I/F: 10BASE-T/100BASE-TX, RJ45 connector
Network protocol: TCP/IP, HTTP
Level Control
Output level selection (+4 dB (*1), -10 dB (*2), -50 dB (*1)
LOW CUT ON/OFF"
User Control
Power switch
Indicators
Power indicator (blue), Mute indicator (red), Signal indicator (green)
Finish
Pre-coated steel plate, black, 30 % gloss
Dimensions
210 (W) x 45.7 (H) x 271.5 (D) mm (8.27" x 1.8" x 10.69")
Dedicated Software
PC browser software
(for setting of tracking distance/range, sensitivity/speed, mute ON/OFF)
Operating Temperature
0 °C to +40 °C (32 °F to 104 °F)
Operating Humidity
90 %RH (no condensation)
Included Accessories
Removable terminal plug (3 pins) x1
Optional Accessories
AC adapter: AD-246
Rack mounting bracket: MB-15B-BK (for rack mounting one control unit), MB-15B-J (for rack mounting two control units)
Wall mounting bracket: YC-850 (for one control unit)