Pro-Audio Speakers

HY-CM10W Ceiling Mount Bracket

The HY-CM10W Ceiling Mounting Bracket is used to mount F-1000 Series or F-1300 Series speakers to a ceiling in a horizontal configuration.


HY-CM10B Cluster Bracket

The HY-CM10B Ceiling Mounting Bracket is used to mount F-1000 Series or F-1300 Series speakers to a ceiling in a horizontal configuration.


HY-CL20B Cluster Bracket

The HY-CL20B Cluster Bracket is used for cluster ceiling suspension of 4 F-2000 Series speakers.


HY-CL10B Cluster Bracket

The HY-CL10B Cluster Bracket is used for cluster ceiling suspension of 4 F-1000 Series or F-1300 Series speakers.


HY-C0801W Ceiling Mount Bracket

The HY-C0801W Ceiling Mount Bracket is designed to mount the speaker system to a ceiling in conjunction with the optional speaker mount bracket.

 


HY-C0801 Ceiling Mount Bracket

The HY-C0801 Ceiling Mount Bracket is designed to mount the speaker system to a ceiling in conjunction with the optional speaker mount bracket.


HY-BH10B Board Hanger Bracket

The HY-BH10B Board Hanger Bracket is used to mount F-1000 Series or F-1300 Series speakers to a temporarily installed partition board. The speaker can be installed in either a vertical or horizontal orientation.


HY-BC2W Enclosure for FB-3862CU, White

The HY-BC2W is a white metal enclosure that can be attached to TOA’s FB-3862 CU ceiling subwoofer. The HY-BC2W is ideal for exposed structures or open plenum ceilings with contemporary open architecture. The installation of both the subwoofer and the enclosure are fastened through the subwoofer itself where both of them hang from the ceiling by means of two hangpoints attached to the FB-3862CU subwoofer. 

 

         


HY-BC1 Back Can

The HY-BC1 Back Can (suspension) is a metal case that can be attached to a flush-mount ceiling speaker when mounted in exposed applications. Ideal for TOA’s F-122C, F-2322C, F-2352C or F-2352SC. With 4 knockouts on the side, it permits the Electrical Contractor to install the Back Can prior to the speaker installation by connecting and pulling the cables. The HY-BC1 could also be used in exposed ceiling and can be hung from a ceiling suspension pipe.

   


HY-AH1 Hanging Bracket

The HY-AH1 Anchor Hanging Bracket is designed to support ceiling-suspended speakers from an anchor bolt in order to prevent the speaker's full weight from being directly applied to the ceiling panel. It is used in conjunction with reinforcement hardware supplied with the speaker.


HY-60DW-WP Wall Adjustment Bracket

By using three HY-60DW-WP brackets, the directivity angle mode of the HX-7B-WP can be changed to 60° mode. It is also possible to change the directivity angle mode to 15° mode, 30° mode or 45° mode. This bracket is designed for outdoor use.

  


HY-60DB-WP Wall Adjustment Bracket

By using three HY-60DB-WP brackets, the directivity angle mode of the HX-7B-WP can be changed to 60° mode. It is also possible to change the directivity angle mode to 15° mode, 30° mode or 45° mode. This bracket is designed for outdoor use.