C-DR0101 Digital Video Recorder
C-DR0101 NTSC
The C-DR0101 is a single-channel digital video recorder with 1 channel of video input, and permits connected camera images to be recorded onto its large-capacity internal hard disks using a digital compression system. It can simultaneously play back recorded camera images while continuing to record images onto the hard disk. The digital video recorder can also be easily connected to an existing switcher system, replacing previously installed analog time-lapse VCRs. Mounting in EIA-Standard equipment racks can also be easily performed with the addition of optional rack mounting brackets.
- (*1) 0 dB = 1 V
| Power Source | 110 - 120 V AC, 50/60 Hz |
|---|---|
| Power Consumption | 35 W (640 mA) |
| Image Compression System | Motion JPEG |
| Recording Medium | E-IDE Hard Disk 320 GB (160 GB × 2) |
| Video Input | 1 input, VBS 1.0 V(p-p), 75 Ω, BNC |
| Video Output | Front: 1 output, VBS 1.0 V(p-p), 75 Ω, RCA pin jack Rear: 1 output, VBS 1.0 V(p-p), 75 Ω, BNC |
| Switcher Video Input | 1 input, VBS 1.0 V(p-p), 75 Ω, BNC |
| Switcher Video Output | 1 output, VBS 1.0 V(p-p), 75 Ω, BNC |
| Audio Recording System | 8 bits, Linear PCM, sampling frequency: 16 kHz |
| Audio Input | 1 input, -10 dB(*1), 10 kΩ, RCA pin jack |
| Audio Output | Front: 1 output, -10 dB(*1), 600 Ω, RCA pin jack Rear: 1 output, -10 dB(*1), 600 Ω, RCA pin jack |
| Frequency Response | 300 - 6,000 Hz |
| Alarm Input | 1 input (EDGE, LEVEL), no-voltage make contact input, open voltage: 2 V DC, short-circuit current: 0.5 mA, loop resistance: under 100 Ω, screwless connector |
| Alarm Output | 1 output, open collector output, withstand voltage: 30 V DC, control current: 20 mA, screwless connector |
| Picture Quality | Changeable in 5 steps File size: 64 kB (LEVEL 1), 40 kB (LEVEL 2), 32 kB (LEVEL 3), 24 kB (LEVEL 4), 16 kB (LEVEL 5) |
| Pixels | 720 × 240 (fixed) |
| Recording Intervals | 15 steps (1/60, 1/30, 1/15, 1/10, 1/5, 1/3, 1/2, 1, 2, 3, 5, 10, 20, 30, 60 sec) |
| Pre-Alarm Recording | 0 sec, 10 sec, 15 sec, 20 sec, 30 sec, 1 min, 2 min, 5 min |
| Alarm Recording | 10 sec, 15 sec, 20 sec, 30 sec, 1 min, 2 min, 3 min, 4 min, 5 min, 10 min (Edge mode) |
| Post Alarm Recording | 0 sec, 10 sec, 15 sec, 20 sec, 30 sec, 1 min, 2 min, 5 min (Level mode) |
| Date/Time | Year/month/date/hour/minute/sec, 24-hours format display monthly deviation of within ±30 seconds (25℃), can be operated until the leap year 2099 summertime (daylight saving time) settings |
| Internal Timer Recording | 10 independent programs (date, daily, weekly, designated day-of-the-week) recording interval, start and end times, picture quality, and audio on-off can be set. |
| Search Function | Date/Time search, block search, time shift search |
| System Failure Output | 1 output (HDD failure, Video loss, Fan failure) open collector output, withstand voltage: 30 V DC, control current: 20 mA, screwless connector |
| Control Input Terminal | Alarm reset, Recording start, Recording stop, Clock synchronization no-voltage make contact input, open voltage: 2 V DC, short-circuit current: 0.5 mA, loop resistance: under 100 Ω, screwless connector |
| Control Output Terminal | Alarm reset, Clock synchronization, Disk full: Open collector output, withstand voltage: 30 V DC, control current: 20 mA, screwless connector Switcher control: TTL level negative logic pulse, pulse width over 17 ms, screwless connector |
| Communication Function | RS-232C (External control function)(*2), D-sub connector (9 P, male) 100BASE-TX Ethernet terminal |
| Operating Temperature | +5℃ to +40℃ |
| Operating Humidity | Under 80% RH (no dew condensation) |
| Finish | Panel: Aluminum extrusion, black, 30% gloss Case: Surface-treated steel plate, black, 30% gloss |
| Dimensions | 420 (W) × 53.8 (H) × 331 (D) mm |
| Weight | 5.3 kg |
| Accessory | Power supply cord (2 m) …1 |
| Option | Rack mounting bracket: MB-15B |
- (*2) Control software is not supplied as standard.