How to Broadcast the National Anthem with a single button push using the N-8000 IP Intercom
If you have an N-8000AF being used for bell scheduling in your school intercom system, the addition of an EV-20R can allow you to broadcast the national anthem to your school and stop automatically.
Here’s what you need to do:
1. Determine how long your national anthem recording is. Once determined, plug the duration into the “signal activation time” of your schedule settings into the N-8000 setting software (anyone from 6-9 can be used). Example duration of 100 seconds is used below in signal #6.
2. Now you must program a speed dial/one touch dial on your master station. The function code will be: FUNCTION 91, time signal # (6-9 depends on which signal you chose above), 0 or 1 (0 is access to external control OFF; 1 is access to external control ON) then Zone # I.e. FUNCTION 91 6 0 1 - Function 91 is the code, 6 is the tone/C-OUT chosen, 0 for access to external control off, 1 represents ZONE 1
Have a question you'd like Dr. Sound to answer? Send it to Dr. Sound and he will answer it right away. It may even appear in next month's newsletter and you will receive a free T-shirt for winning the Tech Tip of the month submission!